Bottled Drinking Water Treatment Applications

The following process costs-saving applications of Innosol-BTF instrumentation have been identified for Bottled Drinking Water Treatment Facilities:

  1. Process costs saving flocculation/coagulation process
  2. Accurate and fast indication of potential presence of pathogenic organisms on all stages of treatment of drinking water
  3. In-situ analyzing concentration, size, and type of suspended solids and semi-solids in large volumes of water during the entire drinking water treatment cycle
  4. In-situ trapping and concentrating particles of user-defined sizes from a large user-defined volume of water to a small user-defined water volume while replacing traditional filter-based methods with the fundamentally new proprietary technology for the purpose of preserving certain important properties of inorganic and organic particles
  5. Detection, counting, and sizing of targeted tagged and untagged pathogens in water detection, counting, and sizing of targeted tagged and untagged pathogens in water
  6. Monitoring and optimization of back-washable filters, micro- and nano-filtration modules
  7. In-situ monitoring inorganic and organic particle log-removal performance
  8. In-situ monitoring raw water trending
  9. In-situ monitoring dynamics of pathogens growth and accumulation of organic and inorganic slag in any segment of a Bottled drinking water treatment facility
  10. Advanced flocculants/coagulants optimization
  11. contact R&D Innovative Solutions for more information)

Discussion on Costs-Saving Flocculation/Coagulation Process.

Highlights: save at least 20% annually on cost of flocculating chemicals, not including savings on the related labor costs and the slag removal expenses

Many reputable water treatment facilities have tried using different flocculating chemicals towards finding the most effective solution for removal of particles form source water.

There are many types of flocculants available for use in drinking water treatment process: http://en.wikipedia.org/wiki/Flocculant. The flocculants can be divided in two large groups:

  1. Salts of aluminum and some other inorganic chemicals
  2. Long-chain polymers and some other organic chemicals

Whatever flocculants a drinking water treatment facility uses within their water treatment processes, every flocculating chemical has significantly different efficiency in attracting inorganic particles vs. organic particles: some flocculating materials attract organic particles significantly more efficiently whereas some other flocculating materials attract inorganic particles significantly more efficiently. There are fundamental scientific reasons explaining the above phenomenon. Please contact R&D Innovative Solutions Inc. for more information.

Taking in consideration that some flocculating chemicals are relatively very expensive and not necessarily have superior efficiency in attracting particles comparably to basic flocculating chemicals (i.e. alum), it takes drinking water treatment facilities significant efforts and financial resources to identify the best flocculating chemicals satisfying the specific requirements of a particular water treatment facility. In the end, very often (and sometimes following a few- or several years' process of attempting to identify the best flocculating chemicals) the drinking water treatment facility) uses just one or few flocculating chemicals in their daily practice.

Until Innosol-PLF technology has been developed, there was no commercially available technology to in-situ access concentration, size, and certain other properties of organic and inorganic suspended solids and semi-solids in large volumes of water. For example, using the data on concentration, size, and type of particles in water produced by Innosol-BTF instrument, drinking water treatment facilities are able to mix (manually or automatically) two or more (if desired) flocculating chemicals in the proportion corresponding to the ratio of organic/inorganic particles of certain dimensions range in source water, where the first flocculating chemical (in this example) has significantly higher efficiency in attracting organic particles in water while the second flocculating chemical (in this example) has significantly higher efficiency in attracting inorganic particles in water. Thus, efficiency of the entire flocculating process significantly increases resulting in substantial savings.

It has been demonstrated that through implementing Innosol-BTF instrumentation into water flocculation process, a large reputable water treatment facility which follows the best manufacturing practices and equipped with the best commercially available equipment can save, very conservatively, at least 20% annually on the cost of flocculating chemicals, plus the savings on the related laborís costs and the slag removal expenses. As a good reference, the said savings for a drinking water treatment facility serving the population of 1mln. can save at least $50,000 as described above. Often, smaller drinking water treatment facilities cannot afford equipment and manufacturing practices used by large facilities. Therefore, smaller drinking water treatment facilities through implementing Innosol-BTF instrumentation into water flocculation process would typically save, very conservatively, more than 25% annually on cost of flocculating chemicals, plus the savings on the related labor costs and the slag removal expenses. Please contact R&D Innovative Solutions for more information on all the above.

The North American Water Quality Association WQA selected the Innosol technology and instrumentation as one of the most important innovations. Search for Innosol here

"...Innovative Multi-Application Large Volume Contaminant Detector: Reduces Process Costs, Monitors Product Water Quality, and Enhances Consumer Safety...The new instrumentation platform, Innosol-PLF, allows in-situ (online) detection, sizing, counting, and advanced monitoring of a wide range of biological and inorganic suspended solids (and more) in thousands of gallons of water and other liquid media, allowing for a number of unique cost-saving applications in industrial, commercial, and municipal markets..."

See how Innosol instrumentation can benefit your facility

The value added summary breaks down the benefits of Innosol instrumentation stage by stage in water treatment processes so you can see what applies to your facility.

Limited-time offer

Free-of-charge on-site in-situ in-depth analysis of performance of all stages of water treatment processes and distribution.

Managers or engineers of Canadian and US Drinking water treatment facilities and water distribution systems are offered free-of-charge help to learn in depth performance of all water-treatment processes at their sites to identify ways of improving water quality, water safety, and economic efficiency of potable water production and distribution. Strict confidentiality guaranteed where requested.

Learn more and apply.